< Previous   Next >

2014 - Mazda6 - Body and Accessories

AUDIO UNIT PERSONALIZATION FEATURES SETTING PROCEDURE

Door Locks Systems

1. Switch the ignition ON (engine off or on).
2. Turn the audio unit power on.
3. Select the following from the audio unit screen.
a. “Setup”
b. “Vehicle”
c. “Door Locks“
4. Select the following items and change the setting.
Advanced keyless entry system


Audio unit display

Function

Initial setting

Settings

Control module

Auto Re-lock Time

The operation start time of the auto re-lock function can be changed.

30 seconds

30 seconds / 60 seconds / 90 seconds

Start stop unit

Lock Beep Volume

The keyless beeper volume can be adjusted.

Medium

Off / Low / Medium / High

Start stop unit

Walk Away Lock

The out-of-area (reception area) type auto lock function can be set.

OFF

OFF / ON

Start stop unit


Keyless entry system


Audio unit display

Function

Initial setting

Settings

Control module

Auto Re-lock Time

The operation start time of the auto re-lock function can be changed.

30 seconds

30 seconds / 60 seconds / 90 seconds

Start stop unit


Power door lock system


Audio unit display

Function

Initial setting

Settings

Control module

Unlock Mode

2-step unlocking system can be set.

Once Driver's, Twice: All Doors

Touch Once: ALL Doors / Once Driver's, Twice: All Doors

Start stop unit

Auto Door Lock Mode

Auto door lock function can be changed.

Lock: Driving, Unlock: IGN Off

OFF / Lock When Driving / Lock: Driving, Unlock: IGN Off / Lock When Shifting Out Of P / Lock: Shift From P, Unlock: In P

Rear body control module (RBCM)


Lighting Systems

1. Switch the ignition ON (engine off or on).
2. Turn the audio unit power on.
3. Select the following from the audio unit screen.
a. “Setup”
b. “Vehicle”
c. “Lighting“
4. Select the following items and change the setting.
High beam control (HBC) system


Audio unit display

Function

Initial setting

Settings

Control module

High Beam Control

The high beam control (HBC) system can be switched between operable and inoperable.

On

On / Off

FSC


Turn light system


Audio unit display

Function

Initial setting

Settings

Control module

3-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

On

On / Off

Rear body control module (RBCM)


Auto light system


Audio unit display

Function

Initial setting

Settings

Control module

Auto-headlight On

Auto light sensor sensitivity can be changed.

Medium

Light / Medium Light / Medium / Medium Dark / Dark

Rear body control module (RBCM)


NOTE:

Room light control system


Audio unit display

Function

Initial setting

Settings

Control module

Interior Light Timeout - Door Open

  • The front/rear map light and courtesy light illumination time after any door is opened can be changed.

  • The trunk compartment light illumination time after the trunk lid is opened can be changed.

30 minutes

60 minutes / 30 minutes / 10 minutes

Rear body control module (RBCM)

Interior Light Timeout - Door Closed

  • The front/rear map light and courtesy light illumination time after all the doors are closed can be changed.

15 seconds

60 seconds / 30 seconds / 15 seconds / 7.5 seconds

Rear body control module (RBCM)


Wiper Systems

1. Switch the ignition ON (engine off or on).
2. Turn the audio unit power on.
3. Select the following from the audio unit screen.
a. “Setup”
b. “Vehicle”
4. Select the following items and change the setting.
Auto wiper system


Audio unit display

Function

Initial setting

Settings

Control module

Wipers

Auto wiper system can be set to operable or inoperable.

On (Rain Sensing)

On (Rain Sensing) / Off (Intermittent)

Rear body control module (RBCM)




< Previous   Next >
Back to Top
© 2012 Mazda North American Operations, U.S.A.